Why is it called tray ceiling?
Tray ceilings get their name from the fact that they look like a big, upside-down tray in place of your roof. This type of ceiling is usually rectangular, but it can be oval or round. Depending on the shape and lighting paired with it, they can make any room dramatic and elegant, or more intimate.
What is tray ceiling design?
A tray ceiling is another name for an inverted or recessed ceiling. For these designs, the center of the ceiling is several inches to multiple feet higher than the ceiling near the perimeter of the room.
What are the different types of ceilings?
Different Types of Ceilings For Your Commercial and Residential Space
- Conventional Ceiling. A conventional ceiling construction type is commonly found in homes.
- Suspended Ceiling.
- Coffered Ceiling.
- Tray Ceiling.
- Coved Ceiling.
- Cathedral Ceiling.
- Shed Ceiling.
- Beam Ceiling.
What is a tray or coffered ceiling?
The tray ceiling is one large recess in a ceiling while the coffered ceiling has a series of sunken panels. TRAY CEILING: a recess in a ceiling that resembles an inverted tray. Often rectangular, though it can be other shapes, the tray ceiling is used to create architectural interest by breaking up a flat ceiling line.
Is a tray ceiling worth it?
“Tray ceilings can bring dynamic design to any room,” says interior designer Kendall Wilkinson. “They easily add a perceived sense of height to your space, which creates a luxurious feeling from the view below.” Plus, as HGTV reports, work that goes into installing a tray ceiling can ultimately add value to your home.
Are tray ceilings expensive?
Prices vary in every city and for each project, but homeowners typically spend $2 – $4 per square foot to install tray ceilings. In a new-construction home, you might spend $500 – $1,500 total per ceiling.
What is cathedral ceiling?
Vaulted and Cathedral Ceilings A vaulted ceiling slopes upward from both sides to form a peak. On the other hand, cathedral ceilings are defined by their symmetry: they feature two equal sloping sides that meet at a higher point in the middle and often conform to the shape of the roof.
Are tray ceilings more expensive?
While a tray ceiling can cost up to $1,500, home improvement service Kompare It claims a tray ceiling is considerably cheaper when it is installed during a home’s construction.
How deep is a tray ceiling?
The shape of a tray ceiling often follows the contour of the room, by means of a drop-down border around the perimeter of the ceiling. The inside tray recession can be anywhere from one inch to more than a foot deep, depending on the height of the ceiling and the desired effect the homeowner is going for.
What is a trey or tray ceiling?
A tray ceiling is a rectangular architectural feature that is either inverted or recessed. Tray ceilings can be plain, ornate, subtle or dramatic. Lighting is commonly featured in this design, and these ceilings are often found in dining rooms, hallways and living rooms.
How to build a tray ceiling?
Attach drywall to the entire ceiling. Cut drywall to size with a sharp utility knife and a straightedge.
Is it tray ceiling or Trey ceiling?
If you’re considering a coffered or tray ceiling for your remodel or new construction, your builder may refer to both types by different names. Coffered ceilings are occasionally called beam and panel ceilings or box beam ceilings. Alternative names for tray — sometimes spelled trey — ceilings include pocket ceilings and recessed ceilings.
What is a Trey ceiling?
trey ceiling is a term used in house construction suggesting a raised portion of a ceiling creating a second, or higher ceiling within a regular ceiling. I do not know why the word “trey” is used to denote this shape, although most trey ceilings look from below like a very large inverted flat tray.