What is IPC a 610D?
Course Description. The IPC, nationally recognized as an electronics manufacturing trade association, has issued the IPC-A-610D “Acceptability of Electronic Assemblies.” This document provides a pictorial interpretation of the board/board assembly showing target, acceptable and defect conditions.
What is a IPC certification?
The a-IPC (Associate – Infection Prevention and Control) entry-level certification examination is a measure of basic infection prevention competency. It is intended for the novice IP and for those interested in pursuing careers in infection prevention and control.
What is the difference between J STD 001 and IPC-A-610?
For example, IPC-A-610 specifies mandated criteria that should be used daily by board inspectors. The J-STD-001, on the other hand, provides the best practices that process engineers, supervisors and technicians should follow to achieve acceptable boards.
What is the maximum magnification allowed when inspecting conformal coating?
4X
[3] Physical appearance can be easily verified by visual inspection. Magnification may be used up to 4X.
What are benefits of IPC?
The three major benefits of receiving or renewing IPC certification in electronic assemblies and inspection include:
- 1.) Building Consistent Products.
- 2.) Improving Cross-Channel Communications.
- 3.) Reducing Costs.
- About EPTAC. For over 30 years EPTAC has been a leading provider of solder training and IPC certification.
How much does an IPC certification cost?
J-STD-001ES
| Certification | Type | Cost |
|---|---|---|
| Initial Certification | Certified IPC Specialist (CIS) | $1351.00 |
| Recertification (Every 2 years) | Certified IPC Specialist (CIS) | $936.00 |
| Initial Certification / Recertification (Every 2 years) | Certified IPC Trainer (CIS)Non-Modular | TBD |
| Initial Certification | Certified IPC Trainer (CIT) | TBD |
How long is IPC 610 good for?
two years
Upon certification, you are expected to recertify every two years, though a 90-day grace period is available after expiration. For this reason, the IPC-A-610 certification remains an incredibly useful tool for those new to the field as well as seasoned veterans.
What is J IPC standard?
IPC J-STD-001 is an individual level certification based on a standard published by IPC titled “Requirements for Soldered Electrical and Electronic Assemblies”. The standard lists requirements for the manufacture of electrical and electronic assemblies and includes materials, methods and verification criteria.
How do you inspect conformal coating?
Most conformal coatings now carry an optical brightener which, when exposed to ultraviolet (UV) light, fluoresces. This, in turn, allows easier inspection. However, some defects cannot be seen under UV and white (natural) light may also be needed.
Who should get an IPC-A-610 certification?
Anyone responsible for the quality and reliability of electronic assemblies should consider becoming an IPC-A-610 Certified IPC Trainer. Trainers and quality supervisors versed in electronic assembly are excellent candidates for A-610 training, as are engineering and manufacturing supervisors with assembly responsibilities.
What is the difference between IPC a-610d and IPC J-std-001d?
IPC-A-610D is $50 for IPC members, $100 for nonmembers, while IPC J-STD-001D is $40 for members, $80 for nonmembers. Further information can be found at www.ipc.org/onlinestore.com.
Where is the IPC office for electronic assemblies located?
Acceptability for Electronic Assemblies Developed by the IPC Task Group (7-31b) of the Product Assurance Subcommittee (7-30) of IPC Users of this publication are encouraged to participate in the development of future revisions. Contact: IPC 3000 Lakeside Drive, Suite 309S Bannockburn, Illinois 60015-1219 Tel 847 615.7100 Fax 847 615.7105
Who is a good candidate for A-610 training?
Trainers and quality supervisors versed in electronic assembly are excellent candidates for A-610 training, as are engineering and manufacturing supervisors with assembly responsibilities. “An excellent course of study on an excellent document…