What is a good transmission for a 383 stroker?

It all depends on your needs, but you could use a 7004r, 4l60, 4l80, th400, th200, 200r4, th350, or even a th350c.

What car comes with a 383?

The 383 served as a mainstay for police prowl cars. From 1967 to 1971, most law enforcement agencies equipped their Dodge Coronets and Polaras and Plymouth Furys and Belvederes with high-performance 383s. The Dodge cruisers could be equipped with two versions of the 383 with horsepower ratings of 270 or 325.

Who makes a 383 motor?

A lot has changed since the first Chevy 383 strokers came about. Simply put, there’s no reason not to get a crate engine with a hydraulic roller camshaft, a one-piece rear main seal, or a four-bolt block.

What makes a 383 small block Chevy?

A 383 stroker has a 0.030 over bore of the stock 350, giving you 4.030 as a bore diameter. Putting the 400 crank in the 350 increases the stroke to 3.750. Other than that, all the other dimensions stay the same. If you do the math, you will get 382.6; round up and you have 383 ci.

Is the 383 a big block?

The 383 Chrysler B engine is known as the Mopar big block that nobody loves. Typically, gearheads favor its beefier big brother, the 440. The 383 B is characterized by its large cylinder bore of 4.25 inches with a short stroke of 3.375.

Why is it called a stroker engine?

As its name implies, a stroker is where we increase engine displacement by increasing piston stroke. When we increase stroke, we take the piston deeper in the cylinder bore, which increases displacement. The longer the stroke, the greater the fuel/air charge.

How much HP does a 383 big block have?

The affordable and underrated 383 gets a huge boost in the arm by Muscle Motors—to the tune of 559 hp and 611 lb-ft.

What is a performance crate engine?

Performance crate engines from Promar include a performance long block engine assembled with an oil pan, a harmonic balancer, a pair of valve covers, a timing cover, an intake manifold, and a flex plate.

What is crate motors?

A crate motor is basically a ready-built (and ready to install) motor. It can be stock, or over-sized. The definition has changed over the years, at least in terms of what it means in today’s marketplace. Now crate engines applies to rebuilt engines too.

What is a 383 Stroker?

The Chevrolet 383 Stroker is a hot rod engine never truly created in normal production for use in a specific car. The engine is a General Motors Chevrolet engine that is made for hot rod enthusiasts who love to modify their cars and add some extra power.