How do I log into My CenturyLink modem?

Log in to CenturyLink Go to the CenturyLink router login address: on your internet browser window. You will see the admin username and password on a sticker attached to your modem. Enter the router username and password.

How do I find My CenturyLink PIN number?

Where to get your security code

  1. In your Welcome Letter – The code is printed on the Welcome Letter that you receive after you first order new service from My CenturyLink.
  2. On your bill – The code also appears on the first three monthly bills you receive.

What is a security code for CenturyLink?

* In Minnesota area codes 763 and 952, call 1 888-612-8052 to reach the Update Center. In Iowa area code 641, call 1 888-515-8052. In Arizona area code 928, call 1 888-520-8052. In Oregon area code 971, call 1 888-503-8052.

How do I authenticate my CenturyLink account?

Select the Wireless Setup icon in the main menu.

  1. If given the choice, select “2.4 GHz” or “5 GHz” in the left sidebar.
  2. Select “MAC Authentication” in the menu on the left.
  3. Select your wireless network (SSID).
  4. If you are setting up MAC authentication, select “Enable.”

How do I reset My CenturyLink password?

Select the My CenturyLink menu in the top navigation, and click on “Change Email Password” in the drop-down menu. A new browser window will open. Enter your current password in the “Current Password” field. Enter your new password into the “New Password” and “Confirm New Password” fields.

How do I reset my CenturyLink WiFi?

  1. Locate the Reset Button. Look for the factory reset button on the back of your modem or router—it’s likely red.
  2. Use the Reset Button. To initiate the factory reset, press and hold the button for at least 15 seconds.
  3. Wait. Wait for at least 3-5 minutes for the factory reset to finish.

How do I access my AT modem settings?

Modem & Router Settings

  1. From a device that is connected to the AT Wireless Internet network, open the web browser then go to http://attwirelessinternet.
  2. ACCESS MODEM SETTINGS: Click the Wi-Fi tab then click Edit under the desired Wi-Fi frequency band.