How do I find my nslookup name server?

How To Use NSLOOKUP to View Your DNS Records

  1. Launch Windows Command Prompt by navigating to Start > Command Prompt or via Run > CMD.
  2. Type NSLOOKUP and hit Enter.
  3. Set the DNS Record type you wish to lookup by typing set type=## where ## is the record type, then hit Enter.

How do I find nameservers in Linux?

To check the current nameservers (DNS) for any domain name from a Linux or Unix/macOS command line:

  1. Open the Terminal application.
  2. Type host -t ns domain-name-com-here to print the current DNS servers of a domain.
  3. Another options is to run dig ns your-domain-name command.

How do I find my DNS hostname Linux?

Linux Find Out My Machine Name/Hostname

  1. Open a command-line terminal app (select Applications > Accessories > Terminal), and then type:
  2. hostname. hostnamectl. cat /proc/sys/kernel/hostname.
  3. Press [Enter] key.

How do I find my domain name in AIX?


  1. Run the following command as user root : # grep domain /etc/resolv.conf If a DNS domain is configured, you see output like as follows: domain If a DNS domain is not being used, set up the domain name by completing as follows:
  2. Do one of the following based on your system:

How many root name servers are there?

There are more than 1,300 root server instances around the world, on all six populated continents. They are reachable using 13 numeric IP addresses – one per operating organisation, except for Verisign, which operates two root servers.

What port does nslookup use?

Port: Specifies the port number to use when contacting the name server. The Domain Name System is a well-known service and has been allocated port 53. The NSLOOKUP command uses port 53 by default, but the port option enables you to specify another port to access.

What the nslookup tool can tell you about internet domains?

Using the nslookup utility, you can determine the IP address of any server by its DNS name, perform the reverse DNS lookup, and get information about the various DNS records for a specific domain name. When running, Nslookup sends queries to the DNS server that is specified in your network connection settings.

How to use nslookup command?

– Introduction. NSlookup is a command-line tool used for testing and troubleshooting DNS servers. – Getting Started. Let’s start with doing your first NSlookup query. Open CMD and then type nslookup. Type or any DNS domain you would like to get its IP address. – NSlookup options. NSlookup has many available options. Most of them are described below. NSlookup uses the primary DNS server in your IP settings as Default Server for DNS querying. – Conclusion. NSlookup program has many advanced options to test name resolution and a verbose debugging mode for advanced troubleshooting, Mastering this program is very important for System and Network Engineers

Does nslookup use hosts file?

DNS lookups do not use a hosts file. Ever. @BartDeVos no, it’s not wrong. A generic host lookup (i.e. gethostbyname() can go via the hosts file, or via DNS, but a DNS-specific lookup (as performed by nslookup) will not use the hosts file.