What is DD-WRT and how does it work?

What is DD-WRT and how does it work?

DD-WRT is one of a handful of third-party firmware projects designed to replace manufacturer’s original firmware with custom firmware offering additional features or functionality. Sebastian Gottschall, a.k.a. “BrainSlayer”, is the founder and primary maintainer of the DD-WRT project.

How do I identify the correct DD-WRT firmware version for my Device?

The user-friendly dd-wrt download page will help you identify the correct “killer” and dd-wrt firmware versions (as applicable) for your device as needed. However, you must use the peacock thread and use the information in the Hardware-specific page to accurately identify your hardware and not create a problem that renders your router useless.

What is the default IP address for DD-WRT?

The default for DD-WRT and many devices is [192.168.1.1], or see [wikidevi.com Wikidevi]. If the IP address is unknown, see Obtaining Router IP.

What is DD-WRT mixed mode format protection?

In Mixed mode, dd-wrt routers are able to offer various wifi network types (B, G and N) at the same time from a single 2.4GHz radio. 802.11n transmission is always embedded in an 802.11a, for 5GHz radios, or 802.11g for 2.4GHz radio transmissions. This is called Mixed Mode Format protection (also known as L-SIG TXOP Protection).

Which version of DD-WRT supports IPv6?

In order to use ipv6, you need the Standardor VoIPversion of DD-WRT, as these are currently the only ones which support both IPv6 and radvd. The detailled configuration steps are targeted toward users with a basic DHCP connection for the WAN part.

How do I upgrade DD-WRT to a new version?

Upgrading to a Newer Version of DD-WRT. If DD-WRT is already installed on your router, you can simply upgrade to a new version via the web interface or TFTP. However, it is highly recommended that you restore the router to defaults using the reset button before and after flash.

How it works: In Mixed mode, dd-wrt routers are able to offer various wifi network types (B, G and N) at the same time from a single 2.4GHz radio. 802.11n transmission is always embedded in an 802.11a, for 5GHz radios, or 802.11g for 2.4GHz radio transmissions. This is called Mixed Mode Format protection (also known as L-SIG TXOP Protection).