How do I log into my Netgear cm500?

You can use a web browser and type the URL : The login name is “admin” (without the double quotes) and the password is “password” (without the double quotes).

What is the address of my modem?

Type ipconfig (Windows) or ifconfig (for Mac and Linux) and press Enter. Look for the Default Gateway line to find the IP address represented by a string of numbers and periods. You might also find the IP address printed on the back or underside of the modem, along with the user name and password.

How do I access cable modem settings?

To view the status of your cable modem or modem router initialization: Launch a web browser from a computer or mobile device that is connected to your network. Enter Enter your cable modem or modem router’s user name and password.

How do I find the password for my Westell router?

The default Westell username is “admin,” and the default Westell password is “password.”

How do I reset my Netgear CM500?

To reset your cable modem router:

  1. Locate the Reset button on the back of your cable modem.
  2. Using a paper clip or similar object, press and hold the Reset button for about seven seconds.
  3. Release the Reset button and wait for your cable modem to reboot.
  4. After reboot factory default settings will be restored.

How do I setup my Netgear cable modem?

To install your NETGEAR router using the router web interface:

  1. Using an Ethernet cable, connect your modem to the yellow Internet port on the back of your NETGEAR router.
  2. Connect your computer to one of the Ethernet ports on your router.
  3. Press the Power button on the router.
  4. Open a web browser and enter

Does modem have an IP address?

But, like a router, a broadband modem is a computer with a web based user interface. And, like any device with a web interface, the modem has an IP address. You might think that to address a modem by its IP address, you would have to connect a computer directly to the Ethernet port of the modem.

How do I access my Telstra modem?

For nbn™/ADSL/Velocity/Cable (with Adapter) modems – enter or http://telstra.gateway/ For Cable (without Adapter) modems – enter or http://telstra.gateway/

How do I log into my cable modem router?

You need to log into your router and then pull up a list of connected devices. It should list your DSL modem. Write down the IP address. Then open Chrome or whatever and put in that IP address and you should be able to access your Bell modem.

How do I Find my Telstra modem’s default address?

Here are two options for finding it: Find your Telstra modem’s default address: 1. Ensure your modem is connected and you have a green Wi-Fi light 2. Use a computer or tablet to connect to your Wi-Fi home network 3. Open a web browser (Chrome, Internet Explorer, Firefox, Safari) 4. Enter the correct URL for your modem:

How do I connect my Telstra smart modem to Telstra TV?

Locate the cord with the RED ends, insert the cable into the RED port on the Telstra Smart Modem. Insert the other end into the RED port on the Telstra Cable Adaptor and ensure the box is switched on.

How do I change the security settings on my Westell device?

In the Westell settings site, you can select from five tabs for different setup options. Click on each topic below for an overview. For additional help contact tech support. 1. Under the Wireless tab, select Basic Setup. You can edit the following: 2. Select Save. 3. Select Security. You can edit the following: 4. Select Save.

Why choose Telstra for cable Internet?

Telstra cable internet. Get a better home Wi-Fi experience. The range and reliability you need to keep everyone at home connected. Telstra Smart modem. Included in our cable internet plans. For new customers who stay connected for 24 months. Why choose Telstra for cable? Telstra Smart modem switches to our 4G mobile network if there’s an outage.