How do I log into my airtel broadband modem?

Once you have connected to Airtel ADSL router now open web browser and access airtel zero-touch default login IP Address http://192.168.1.1 and press enter key. Use Airtel default username and airtel zerotouch default password to log in the first time. Press Login button to enter settings.

How do I find my wifi router configuration page?

Find Your Router’s IP Address You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1.

What is Airtel router login?

The IP address of the hotspot device is specified as 192.168. 1.1, with admin as the username and password. The default airtel 4g hotspot login id and password are admin, and the airtel 4g hotspot login IP is 192.168. 1.1.

What is the default username and password for Airtel broadband?

admin
By default though, on both MTNL and Airtel provided routers, both the username and password are “admin” without the quotes (other routers often have “password” without quotes as the default password) . You’ll have to check with the router manufacturer or ISP if this combinations don’t work.

How do I enable 2.4 GHz on my Airtel router?

How to setup 2.4 GHz wifi?

  1. Enter the IP address in a browser.
  2. Login with your username and password – Typically, it will be Username: admin Password: blank or admin.
  3. Click Advanced Settings tab.
  4. Click Network Settings.
  5. Enable the 2.4 Ghz band.

How can I manage my Airtel WiFi router?

How to change Airtel WiFi Password using the router?

  1. Type 192.168.
  2. You’ll be redirected to the router admin settings page.
  3. Enter the username and password for the router.
  4. Select Network or Wireless Network option from the menu (Screenshot)..
  5. Choose Wireless (2.4/5GHz).
  6. Scroll down to SSID Configuration.

How can I configure my Airtel router after reset?

Configuring Airtel VDSL router 777VR1 after resetting accidently

  1. Default Route Selection: Specified.
  2. Channel Type: PTM.
  3. Channel Mode: PPPoE.
  4. Check Enable NAPT and Enable IGMP.
  5. Username: Call customer care to get it.
  6. Password: your account no which you used to login your router.
  7. Type: Continuous.
  8. Default Route: Enable.
Categories: Tips