What does load tray 1 plain letter mean?

An example message would be 024-965 Load Tray 1 Letter Plain. This indicates that the print job sent has requested Letter sized Plain paper from Tray 1. If tray 1 is empty, loaded with A4 sized Plain paper, or Letter sized Thick paper this error will occur.

How do I fix my HP load tray 1 plain letter?

Starts here0:49HP printer load tray 1 plain letter – fix – error – wont print – YouTubeYouTubeStart of suggested clipEnd of suggested clip47 second suggested clipSo just pull them all the way in on. Both side ones and from the back one load. The paper back in doMoreSo just pull them all the way in on. Both side ones and from the back one load. The paper back in do this to both trays or if you only have one tray just do it to one tray.

What is load tray 1 in HP printer?

When the printer tells you to load tray 1 it means the size and or type of paper being asked by the print job does not match the same that the printer thinks it has in the tray.

Why does my printer keep telling me to load paper?

The paper is too slick for the product. The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper settings in the print driver do not match the paper loaded in the paper tray.

Where is Tray 1 on HP Laserjet Pro?

Open Tray 1 by grasping the handles on the left and right side of the tray and pulling down. Slide out the tray extension. For long paper, flip out the tray extension to support the paper. Press down on the tab on the right paper guide, and then spread the paper guides to the correct size.

What to do when your printer says there is no paper?

If you keep on getting error messages saying there is no paper in the printer, check the paper rollers and clean any specks of dust or debris. Also, make sure the paper stack is not wrinkled or bent. Take out the stack of paper and push the tray back in. Take it out again and put back the paper.

How do I refill my HP Tray 1?

  1. Ink & toner cartridges.
  2. Printers.
  3. Save up to 50% on Original HP ink.
  4. Laser printers.
  5. Home & home office printers.
  6. Large format plotter printers.
  7. HP+
  8. Paper.

Why does my Brother printer keep saying its out of paper?

If you have set the Tray Use settings for a particular tray, the machine will feed paper only from that tray. If the selected tray is out of paper, a “No Paper” message will appear on the LCD. You need to reload paper in that tray.

How do I clear my print cache?

Command Method

  1. Select Start.
  2. Type Command .
  3. Right-click “Command Prompt” and select “Run as administrator“.
  4. Type net stop spooler then press “Enter“.
  5. Type del %systemroot%\System32\spool\printers\* /Q then press “Enter“.
  6. Type net start spooler then press “Enter“.
  7. The print queue on your Windows should now be cleared.

How do I load tray 1?

Introduction

  1. Grasp the handle on either side of Tray 1, and pull it forward to open it.
  2. Pull out the tray extension to support the paper.
  3. Spread the paper guides to the correct size, and then load paper in the tray.
  4. Adjust the side guides so that they lightly touch the paper stack, but do not bend it.

Can I use plain paper in tray #2?

You can use only plain paper in Tray #2. These instructions describe how to load paper in Tray #1. The steps for Tray #2 are very similar. If the paper support flap (1) is open, close it, and then close the paper support (2). Pull the paper tray completely out of the machine as shown by the arrow.

What does it mean when the printer says load tray 1?

Lets make this real simple. When the printer tells you to load tray 1 it means the size and or type of paper being asked by the print job does not match the same that the printer thinks it has in the tray.

What is the difference between tray 1 and tray 2?

Tray 1 is the small slot in the front for manually feeding paper. The paper cassette which holds the paper and slides out is called tray 2. Please select tray 2 in the print driver and see if it now works. 05-14-2017 05:22 PM That was the problem!

What should I do if tray 1 is not loading?

Please take a look at the solution for loading Tray 1 and make sure you have the guides in the tray set correctly. Also if you have a bright light pointing at or right over the machine move the light source and try again. If the problem continues please consider contacting your support centre for further assistance.

Categories: Other