## How do I read my Coleman AC model number?

Coleman model number breaks down in the following way:

- The first 4 letters is the Coleman furnace model.
- The numbers in the middle indicate the BTU’s in thousands.
- The last 3 or 4 letters is the series.

**How many BTU is a Coleman Mach AC?**

13,500

MODEL | PROFILE | BTU/h |
---|---|---|

MACH 3 Plus | Medium | 13,500 |

### Where is the model numbers on a Coleman Mach Air Conditioner?

Model and serial numbers for Coleman-Mach rooftop air conditioners can be found in two different places on each unit. -After removing the shroud from the unit, you will find the rating plate on what would be the driver’s side of the air conditioner or on the top of the evaporator cover.

**What size is my Coleman air conditioner?**

You can determine the size in tons of your Coleman or Coleman-Evcon HVAC system by examining the model number on the data plate at the side of the condenser (outdoor unit). Look for two numbers in the model number that are divisible by 6 or 12, which represent the nominal BTU of the system in thousands.

## How old is my Coleman AC?

Using the first, second, third and fourth digits of the serial number 97104119 you will find the year and month of manufacture. The first and second digits are the year and the third and fourth digits are the month.

**How do I know if my AC is 1 ton or 1.5 ton?**

Find the model number. Within this string of letters and numerals, you should find an even, two-digit number. The possibilities on residential units range from 18 to 60. Divide the number by 12 (which represents 12,000 Btu/hr, or one ton of cooling capacity) to get your AC unit’s tonnage.

### How many amps does a 15000 BTU air conditioner use?

Table: How Many Amps Do Window, Portable, Mini-Split Air Conditioners Draw

Air Conditioner Capacity | Amperage (Estimate) |
---|---|

How many amps does a 12,000 BTU air conditioner use? | 8.70 – 13.04 Amps |

How many amps does a 15,000 BTU air conditioner use? | 10.87 – 16.30 Amps |

**How big of a generator do I need to run a 13500 BTU air conditioner?**

If you want to run 13500 btu air condition ,please use 3000 watts generator.

## How do I reset my Coleman Mach Air Conditioner?

To reset the thermostat model 9630-3361, put the thermostat in the off position , pull fuse wait 5 minutes , put the fuse back in wait another 5 minutes , then turn on.

**How do you read a Coleman furnace serial number?**

How to Read Serial Numbers on a Coleman Furnace

- Look for the furnace nameplate.
- Find the box on the nameplate labeled “Serial Number.” Write the series of numbers, or numbers and letters printed inside the box on a notepad.
- Count the number of letters at the beginning of the serial number, if applicable.