What kind of oil do you use on a flute?

Use almond or sesame oil. Mustard oil is also very suitable, it can be added to other oils as a protection against bacteria and mould. These are oils which, unlike most of other (cooking) oils such as olive oil or linseed oil, do not become resinous and thus do not clog the flute.

How do you oil a baroque flute?

I use a small cleaning rod with some tissue or a small piece of cloth to swab the oil inside the bore, making sure all the surfaces are covered. Then, with my fingers I oil the outside of the flute, making sure oil gets into the finger holes, blowhole, the inside of the sockets, etc. Let it sit and soak for a while.

Can I use coconut oil on my flute?

Suggested oils are grape seed oil or coconut oil. Soak a cloth or handkerchief with a few drops of oil and wipe the outside of the flute. We also let oil inside, either by pouring a few drops inside the flute or onto the rod, and then wipe well to make the oil layer as thin as possible.

Can you use Vaseline on your flute?

You should never use cork grease or vaseline on the joints of the flute. The keys themselves should only be oiled by a professional instrument repairer. The two joins on the flute (between the headjoint, the body and the footjoint) don’t need lubricating per se, but sometimes they can get a bit tight.

Should flute joints be greased?

Since the joints of the flute are made of fitted metal, never put cork grease or any other kind of grease on them. The joints of the flute are adjusted to have clearances of mere microns.

Should I oil my flute?

Oiling the instrument should be done three to four times during the first month, and once a month after that However, if the bore or the ends of the tenons look dry then don’t hesitate to oil the flute on a more regular basis. It is not necessary to oil the inside of the head joint.

Can you use Vaseline on flute?

How do you care for a wooden flute?

Wooden Flute Maintenance Tips

  1. Keep the instrument at room temperature wherever possible and avoid extreme heat or cold.
  2. Try to avoid very dry conditions and do not leave a wooden flute in direct sunlight or near a source of heat.
  3. Lightly oil the bore every couple of weeks using bore oil or almond oil.

Can you use wd40 on a flute?

2 – Old oil – For this you need some penetrating oil (something like WD-40) . DO NOT SPRAY THE FLUTE WITH OIL!

Can I oil my flute?

Oiling. Oiling the instrument should be done three to four times during the first month, and once a month after that However, if the bore or the ends of the tenons look dry then don’t hesitate to oil the flute on a more regular basis. Repeat with each joint, pushing the towel into the bore to cover it with oil.

Do you need to oil a wooden flute?

It is generally recommended that you oil a wooden flute as part of its normal maintenance. Selecting the type of oil to use has been a hot topic for conversation, with various instrument makers and players adopting positions for or against various oils.

Can I use boiled linseed oil to finish my flute?

The one loud concensus is *not* to use boiled linseed oil. Beyond that there were various suggestions to use almond oil, raw linseed oil, and olive oil. I happen to be a chemist and an occasional woodworker, though definitly not a hallowed flute-make. Nonetheless, from a finishing point of view I am now less enthusiastic about olive oil.

How to make a flute at home?

In making a flute, you need the best kind of wood and basic woodworking instruments. Grab a pencil and paper to take note of the things you will need. Source: https://www.exportersindia.com/viet-delta-industrial-co-ltd-company3330869/bamboo-for-flute-making-2743185.htm Head to a local hardware store for some bamboo.

Why is commercial bore oil better than vegetable oil for flutes?

The commercial bore oil is much better than either of these or vegetable oil. It is generally agreed that changes in humidity and/or temperature are potential causes for cracks in wooden flutes. Rod Cameron < [email protected] > contributed the following email message to the earlyflute email list: