What is the size of the rp-2100 radio?

The CC Radio-SW/Redsun RP-2100 is a large multi-band portable measuring approximately 11 ½” x 7 ¼” x 2 ¾”, or 290 mm x 185 mm x 70 mm. It is in the same general size category as the Eton S350DL and E-1 radios which is my favorite size for an around-the-house portable radio.

What power supply do I need for my Redsun?

If you buy the Redsun version be aware that they are available with Chinese or English labelling and with either 120 or 220 volt power supplies built in..be sure you order the correct version for your area. The Redsun was also available as the Kaito KA-2100 but that appears to be no longer available.

How do I use the SW band on the CC/Redsun?

The CC/Redsun divides the SW spectrum into three bands, SW 1, SW 2 and SW 3, similarly to those analog radios. With no keypad it takes several seconds to twist the dial from one end of a SW band to the other, although tuning is quick and easy on AM and FM. However, you can navigate quickly with the “Q. Tune/SW Band” button.

Is the Redsun cc/Redsun digitally tuned?

Tuning: The CC/Redsun is a PLL design (digitally tuned), yet it has no keypad for Direct Frequency entry. There are 50 Memory positions with 10 presets per band. This is not a problem to someone like me who uses memories only for a few stations.

Why choose Yamaha swr2100p series?

Yamaha has used its knowledge of both IT and pro audio to provide “SWR2100P series” simple L2 switch that has been optimized for networked audio installations. The switch can take advantage of “Yamaha LAN Monitor” a dedicated computer application that provides ‘network visibility’ for comprehensive monitoring and control.

How many RJ45 ports does the swr2100p network switch have?

The switch can take advantage of “Yamaha LAN Monitor” a dedicated computer application that provides ‘network visibility’ for comprehensive monitoring and control. The SWR2100P series network switch is equipped with ten RJ45 ports.

What is the difference between the SWP1 and swp2 network switches?

The SWP2 series network switch with 10G uplink ports allows a Dante optimized setup and VLAN presets to be recalled by flipping DIP switches. The SWP1 series network switch allows a Dante optimized setup and VLAN presets to be recalled by flipping DIP switches.