In what part of 49 CFR Subtitle B Subchapter C would you find specifications for packaging?

Part 178
§ 178.1 Purpose and scope. § 178.2 Applicability and responsibility.

Does DOT require an inner package?

Scenario 1: You state that shipments of Compressed Gases, N.O.S., UN 1956 in DOT-39 cylinders are required to be packaged in strong, non-bulk outer packagings with a marking of “Inner packagings conform to the prescribed specifications” in accordance with § 173.301(a)(9).

Where can you find the packaging requirements for limited quantities?

The limited quantity is the maximum quantity per inner packaging or article for transporting dangerous goods as limited quantities. It can be found in the column 7a of Dangerous Goods List.

Under which of the following conditions may a material listed as forbidden in column 3 of the Hazardous Materials Table be offered for transport?

Under which of the following conditions may a material listed as “Forbidden” in column 3 of the Hazardous Materials Table be offered for transport? The material is diluted, stabilized, or incorporated in a device and classed in accordance with the regulations.

What are overpacks used for?

In the broadest definition, an overpack is a device that contains one or more packages. It provides protection and is often used for the shipper’s convenience or to consolidate two or more packages.

What is composite packaging?

For the purposes of this guide, composite packaging is defined as packaging that is made from two or more layers of different materials, which are bonded together and are not separable by consumers.

What is vermiculite packaging?

Vermiculite packing material is a commonly used dry, loose fill material for packaging. This insulated packaging materials provides cushioning for delicate objects to prevent impact and shock during shipping and handling. It is pourable, which allows for packing around irregularly shaped items.

What is the name of the material for ID NO 1040?

UN Numbers 0000 through 1060

UN# Guide Name of Material
1038 115 Ethylene, refrigerated liquid (cryogenic liquid)
1039 115 Ethyl methyl ether
1039 115 Methyl ethyl ether
1040 119 P Ethylene oxide

How do you label excepted quantities?

Package must be marked with the Excepted Quantities mark with the following information added: The “*” must be replaced by the primary hazard class, or when assigned, the division of each of the hazardous materials contained in the package. or consignee if not shown elsewhere on the package.

What are forbidden hazardous materials?

It includes but is not limited to:

  • Acetyl acetone peroxide.
  • Cyclohexanone peroxide(s)
  • Diacetone alcohol peroxides.
  • Methylcyclohexanone peroxide(s)
  • Methyl ethyl ketone peroxide(s)
  • Methyl isobutyl ketone peroxide(s)

What does Forbidden mean in column 3 of the HMT?

Column 3 of the HMT contains a designation of the hazard class or division corresponding to each proper shipping name, or the word “Forbidden”. Forbidden means that the material may not be offered for transportation or transported.