How much does a Dana 60 axle cost?
FRONT AXLES
| Brand | Series | Price* |
|---|---|---|
| Dynatrac | ProRock60 | $8,000 |
| Currie | RockJock III 60 | $5,550 |
| TeraFlex | Tera60 | $8,900 |
| Spicer | Ultimate Dana 60 | $7,000 |
Are Dana 60 axles good?
Like we said above, the Dana 60 is the stronger axle. If you want to run big tires or big power you need a Dana 60 axle. At the same time, the Dana 44 is a great axle if you don’t need giant tires or big power. Most people don’t realize how heavy a Dana 60 is and how much unsprung weight affects handling.
What vehicles have Dana 60 axles?
The Dana/Spicer Model 60 is an automotive axle manufactured by Dana Holding Corporation and used in OEM pickup and limited passenger car applications by Chevrolet, Dodge, Chrysler, Jeep, Ford and Land Rover. There are front and rear versions of the Dana 60.
What Jeep has Dana 60 axles?
Jeep Wrangler JK
Jeep Wrangler JK Junkyard Dana 60 Axle Swap – Part 1.
How much does a complete Dana 60 weigh?
Since there are many different variations of Dana 60 and 70 axles, we can’t give those axles a certain weight. However, a rear Dana 60 axle usually weighs about 400 pounds, a front Dana 60 will weigh about 500 lbs, and the Dana 70 is similar in weight to the 14 bolt.
How do I identify a Dana 60 rear end?
It can be identified by its 10-bolt rear cover, which appears to be lying on its side. Each Dana 60 has a build date and bill of materials numbers stamped into the back of the passenger-side axle tube. These numbers are fairly small but they are always on original axles.
What is stronger Dana 60 or Ford 9 inch?
See all 34 photos With its huge 9-inch ring gear, a beefy Dana 60 should be stronger than a 9-inch Ford. But as these Hoosier Gear photos show, the Dana 60 (left) has only a 1.062-inch hypoid offset, compared to the Ford’s larger 2.250-inch (right).
How do I identify my Dana 60 axle?
Many Dana axles have the model ID cast into the fins or centersection. Look for a “44” or “60” cast into the reinforcement ribs. The number can usually be found on the lower right side rib below the differential cover, but it may also be found on other ribs or on top of the main cast structure.
How heavy is a Dana 60?
What is a kingpin Dana 60?
If you’re unfamiliar with kingpins, they are the collection of components that allow a Dana 60’s knuckles to rotate and turn the vehicle.
What Ford trucks have Dana 60 axles?
Ford uses Dana Super 60 Front Driving Axles in 2005 and newer F250, F350, F450, and F550 Super Duty 4×4 trucks. Each axle is built with a Bill of Material (BOM) Tag affixed to the differential cover by two cover bolts.
What car uses a Dana 60 front axle?
The Dana/Spicer Model 60 is an automotive axle manufactured by Dana Holding Corporation and used in OEM pickup and limited passenger car applications by Chevrolet, Dodge, Chrysler, Jeep, Ford and Land Rover. There are front and rear versions of the Dana 60.
How can I tell what is a Dana 60?
Specifications. The Dana 60 was made in a full-floating and semi-floating configuration. The Dana 60 usually has a 30-spline axle shaft.
What size is a Dana 60 axle?
Dana 44 axle tube diameter ranges from 2.5″ to 3″, while the Dana 60 axle tube diameter is 3.125″. So, while the Dana 60 has a stronger housing than the Dana 44, it’s not by a massive amount, especially for the larger Dana 44s.