How do I create a configuration file with the racadm command?
By entering a series of serial or racadm commands, you can perform actions such as upgrading controller firmware, setting a property to a specific value, and viewing the configuration of the controller. You can also use the remote racadm utility to create a configuration file with the racadm cfgsubcommand.
How do I use racadm commands in batch mode?
The serial command shell and remote racadm utility enable you to use racadm subcommands in batch mode. By entering a series of serial or racadm commands, you can perform actions such as upgrading controller firmware, setting a property to a specific value, and viewing the configuration of the controller.
What is the serial and remote racadm interface used for?
The serial command shell interface and remote racadm utility interface enable you to setup and configure your controller, the managed system chassis components, and server modules. Serial and remote racadm commands set or retrieve object property values in the controller properties database.
How do I execute racadm subcommands from a remote console?
The racadm utility provides a remote capability option (-r) that allows you to connect to the managed system and execute racadm subcommands from a remote console or management station. To use the remote capability, you need a valid user name (-u option) and password (-p option), and the IP address of the managed system.
How to enable DHCP on iDRAC?
To enable DHCP on iDRAC # racadm setniccfg -d Password recovery You need a local KVM console to the server Option 1: Boot into the iDRAC configuration utility using Ctrl+E during POST and go to User Authentication to change user name and password Option 2: Boot into the LifeCycle Controller (LCC) using F10 key.
What does racadm do?
Configuration and reset via server’s operating system RACADM will try to launch a graphical shell which isn’t available. Disregard all Xlib related warnings when executing a RACADM command. The tool RACADM is installed on all Fluke Networks, Visual Networks, Netscout and COMCERT DELL bases appliances. To use RACADM you must be root.
https://www.youtube.com/watch?v=Relney5cNYY