What is the main alloying element of the 5000 aluminum alloy?
Magnesium
Description. Magnesium is one of the most effective and widely used alloying elements for aluminum, and is the principal element in the 5000 series alloys. These are moderate-to high-strength, non-heat-treatable alloys that are readily weldable and have excellent resistance to corrosion, even in marine applications.
Is 5000 series aluminum heat-treatable?
The 5000 series grades of aluminium are non heat-treatable alloys. The temper is achieved by the plate being fully annealed and then rolled to the required temper, rather than being heat treated.
Can you weld 5000 series aluminum?
Main Alloying Elements Lincoln suggests that if you have a need to design something of high-strength aluminum, look to a 5000 series high magnesium alloy instead of a 2000 or 7000 series. The 5000 series alloys are weldable and will produce the best results.
What is the strongest grade of aluminium?
5052 aluminum
5052 aluminum is the highest strength alloy of the more non-heat-treatable grades. Its resistance to fatigue is better than most grades of aluminum. Alloy 5052 has a good marine atmosphere corrosion resistance of saltwater and excellent workability.
What is aluminum 5052 H32?
Aluminium alloy 5052 in H32 temper has very good corrosion resistance to seawater and marine and industrial atmosphere. It also has very good weldability and good cold formability. It is a medium to high strength alloy with a strength slightly higher than 5251 and a medium to high fatigue strength.
What is 5000 series aluminum alloy?
5000 series aluminum alloy belongs to the more commonly used aluminum alloy series. Its main features are low density, high tensile strength and high elongation. Under the same area, the weight of 5000 series aluminum is lower than other series, so it is not only used in aviation and ships, but also widely used in conventional industries.
Is the 5000 series aluminium heat-treatable?
The 5000 series grades of aluminium are non heat-treatable alloys. The temper is achieved by the plate being fully annealed and then rolled to the required temper, rather than being heat treated.
What is the corrosion resistance of 5000 series aluminium?
5000 series aluminium possess good corrosion resistance in marine atmospheres and good welding characteristics too. However, as this range includes a high magnesium content, there is the potential for stress corrosion to occur.
What is the strength map for Al-Mg based alloys?
As shown in Fig. 6-14, a strength map is constructed for the Al-Mg based alloys (the 5000 series alloys) to show the utility of the Mk approach to practical alloy design [2]. Here, the alloying elements other than Mg are counted using the Mn equivalent.