What is wrong with my shark vacuum?

What is wrong with my shark vacuum?

Check for a clogged hose or filter; unclog the hose and replace the filter. Wait 45 minutes for the vacuum to cool; then plug in the vacuum. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.

How do I contact shark customer service?

Click Here to visit our Customer Care page. To contact our Customer Services department by phone, please call 0800 862 0453.

What is my shark model number?

NOTE: The specific model numbers and extension types on all shark cleaners can be found on the bottom right-hand corner of every box.

How do I clean my shark vacuum canister?

Open both ends of the dirt canister over a trash can and dump out whatever is in there. Now take the canister to a sink of warm soapy water. Open both ends of the dust canister and put it right into that warm bath. Using a long-handled brush or a rag, get inside that canister and scrub it clean.

Why isn’t my shark vacuum picking up?

Clogged air filters can contribute to suction loss and be the cause of your Shark vacuum not suctioning. Once they’re completely cleaned and dried, replace them back into your vacuum and see if suction gets restored. On the other hand, if your filters aren’t washable, you will have to buy replacement filters.

Can I email shark customer service?

If you have any questions about our 90-day return policy, please call us at 877-581-7375 or email us at [email protected].

How do I complain to Shark?

Phone number: 0800 862 0453.

How do you read the date code on a shark vacuum?

The date code is printed on the metal prong of the power plug and shows the week and year of manufacture in the WWYY format. Recalled units have date codes beginning with the number 48 or lower and ending with 14.

Where is the date code on a shark vacuum?

1. Where is the date code. DK.
2. Where is the date code on the shark rocket. Ruth Mn.
3. The manufacturer’s date code is stamped unto one of the two ac plug blades. Edb4pax.
4. http://www.sharkrecall.com/include/images/locate-date-code.jpg I hope this helps. Bill Burkart.
5. There were.

Can I rinse out my shark canister?

Empty the Dust Canister Soak the canister in soapy water and wash it using your microfiber cloth. Rinse it in cold water and allow it to air-dry. Be sure the canister is completely dry before reassembly. This may take around 24 hours.

How do you open a shark filter?

Starts here0:58How to clean the filters in your Shark Navigator® Zero-M™ Lift-Away …YouTube

How do I connect my shark clean to Wi-Fi?

Launch Shark Clean app on your device. Create your account by entering your email address and choosing a password. With the robot powered on, press and hold the Dock and Clean buttons simultaneously until the Wi-Fi indicator light starts blinking. iOS users go to Step 3. Android users skip to Step 4. Exit the app and open Wi-Fi settings.

How do I charge my shark clean robot?

Charging is complete: BATTERY on the robot will illuminate steadily in blue. Scan the QR code, or search for Shark Clean in the app store and download the app to your device. See other side for pairing instructions. To send your robot into action without using the app, simply press the Clean button.

How long does it take for shark IQ robot to work?

Shark IQ Robot. Please be sure to read the enclosed Shark® Owner’s Guide prior to using your robot. STEP-1: SET UP THE ROBOT. Remove all plastic films before use. Robot may take up to 15 seconds to turn on. Robot will say “Hello, let’s get cleaning” when ready to use.

Is shark a registered trademark of sharkninja?

SHARK is a registered trademark of SharkNinja Operating LLC. SHARK CLEAN, SHARK IQ ROBOT, and SHARK IQ ROBOT SELF-EMPTY are trademarks of SharkNinja Operating LLC. APPLE, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

https://www.youtube.com/watch?v=_3Hqn9CiDtk