How do I fix my LG washer not draining?

Clean the pump filter and filter opening with a soft-bristled brush and warm water. Place the cap back into the drain hose and reattach the hose to the washer. Insert the drain pump filter back into the washing machine, making sure it is inserted securely. Close the drain pump filter cover.

Why is my LG front load washer not draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

How do I force my LG top load washer to drain?

Force drain the unit by starting a cycle and pausing it. After 8 minutes the unit will automatically time out, display DR, and try to drain the unit. Press START/PAUSE button to START the cycle. Allow a few minutes to pass so the cycle begins.

How do I drain my LG Tromm washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

How do you check the drain pump on a LG front load washer?

Test the drain pump.

1. Press POWER to turn the washer ON.
2. Press the SPIN SPEED key until HIGH is selected.
3. Press the START/PAUSE button to start the SPIN ONLY cycle.
4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

How do I know if my drain hose is clogged?

Drain Hose Problems If the hose is clogged, it can prevent the water from being pumped out of the machine. To test this, remove the drain hose attached to the washer and make sure it is clear. An easy way to check that the drain hose is clear is to blow air through it.

How do I reset my LG front load washer?

How to reset the washing machine:

1. Press POWER to turn the washer off.
2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
4. Plug the washer back in, or turn the circuit breaker back on.

Whats OE mean on a LG washer?

OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter.

Why is my LG dishwasher not draining?

This means when the LG dishwasher gets to the time for it to drain out water, it is not draining correctly or cannot drain. This is caused by a CLOGGED DRAIN HOSE or a CLOGGED OR FAULTY DRAIN PUMP. The most likely reason an LG dishwasher shows the OE error is the DRAIN HOSE IS BENT, CLOGGED, OR NOT POSITIONED PROPERLY.

There are two main problems that might cause your LG washer to stop working. The first is a pinched drain hose. The easiest way to fix this is to simply move the washer so that the drain hose is no longer caught between the appliance and the wall. The other cause of a washer not draining is a dirty drain filter.

What are some LG washer problems?

The most commonly reported problems with LG washing machines are an unusual odor, the washer filling too slowly, leaking and motor failure. Error codes are used to determine the cause of hardware failure on some LG washing machines.

Why is my front load washer not draining?

A Samsung front-load washer may not drain water if the load is unbalanced or too large, the drain hose is kinked, the washer door is partially open, the debris filter is clogged, or the washer is not level. A tripped circuit breaker may also cause the washer not to drain.

https://www.youtube.com/watch?v=5rNe2yI8cSA