Can I use 10W-30 instead of 5w20?

Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.

Can you mix 5w20 and 10w30 synthetic oil?

It should be fine, considering the temps, and that the suggested oil viscosity is usually 5W-30, so two quarts of 5W-20 and three of 10W-30 probably come pretty close to some viscosity around 5W-30.

Can I put 10W40 instead of 5w20?

In a 5W20 engine. You could use a 0W20 oil (I use 0W20 oil) in cold weather and it would be Ok by Ford. (they will not say it is good, but they will still honor the warranty..) But 10W40 is way off, and I bet they would be not so happy over any engine problems if they found 10W40 in a failed engine.

What oil can I substitute for 5W 20?

0W20 should be a acceptable substitute for 5W20, as it will (should) be in the apropriate viscosity range over the same temperature range.

What oil is thicker 5W 20 or 10W 30?

5w20 is thinner at lower temperatures, whereas 10w30 is thicker at lower temperatures. 5w20 is better for cold-weather starting, whereas 10w30 is better for sealing action.

What’s the difference between 5W20 and 10w30?

10W30 is thicker and protect older engine with its sealing capability. 5W20 is thinner multi-grade oil that is pertinent for quick starts in the lowest temperatures. In order to protect your car from internal damages, it is beneficial to use only specified engine oil by the manufacturers.

Can you use 5W-20 instead of 5W-30?

5W-20 oil, being the lower viscosity oil (thinner oil) than 5W-30, might help boost your fuel economy. And although you may not notice a vast difference, it does add up over time. However, remember that you should always use the motor oil recommended for your car by your engine manufacturer or mechanic.

What is the difference between 5W-20 and 10W 30 motor oil?

Main Differences Between 5w20 and 10w30 5w20 is thinner at lower temperatures, whereas 10w30 is thicker at lower temperatures. 5w20 is better for cold-weather starting, whereas 10w30 is better for sealing action. Light duty petrol and diesel engines use 5w20, whereas large weight carrying engines need 10w30.

What is the difference between 5W-30 and 10W 30?

10w30 is thicker than 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil. Thicker oil offers better lubrication of motor and engine parts.

What happens if you use 5W-30 instead of 5W-20?

Due to the increased resistance of the thicker 5W-30 oil, your engine will produce slightly lower fuel economy and horsepower output. You also risk engine damage when using 5W-30 instead of 5W-20, as the internal engine components are specifically designed to be used with 5W-20 motor oil.

Is it safe to use 5W20 oil instead of 5W30?

The answer is NO. It is not safe to use 5W20 in an engine that has 5W30 grade recommendation. As both the oils are 5W, they both have the same viscosity at room temperature or when the engine is not running.

What’s the difference between 5W20 and 5W30?

The significant difference between 5w30 and 5w20 is their viscosity. The oil can flow against friction. Overall, when we talk about 5w30 vs 5w20 refers to this difference mainly. Here we will discuss these two oil differences.

Can I use 10W30 instead of 5W20?

When 10w30 is used instead of 5w20, probably, only a few changes are discoverable especially when the engine is about to wear out and is old. Moreover, one of the benefits of thinner oil would be to ignite quickly. Therefore, fewer efforts are required to pump the fuel, which minimizes the fuel economy.

What does 5W20 or 5W30 mean?

What does 5w20 or 5w30 mean? Oil Viscosity Explained 5W – Low temperature dynamic viscosity at 40F with 5 representing the viscosity index, and W representing “winter” 30 – High temperature kinematic viscosity index at 100F Engine oil is complex and generally misunderstood by many. While you have several Oil brands of varying quality, […]